Capture mesh-catalog at feat/r4g (2246ccc4) with the templates its manifests name and its predefined.json, and lay the copy out as a repository's root
The catalogue's manifests moved their content into template files and fall back to predefined keys, so a copy of module.json alone no longer passes the catalogue's own check; the bus's Dockerfile is gone from the catalogue.
This commit is contained in:
Vendored
Executable
+33
@@ -0,0 +1,33 @@
|
||||
#!/bin/bash
|
||||
# zephyrus-backlight + | - | PERCENT — step or set the internal panel's backlight, never below 1 %.
|
||||
# Shipped by the mesh's asus-zephyrus-g14 module; edit the catalogue.
|
||||
#
|
||||
# The panel is the backlight beneath the eDP connector, not a name: in hybrid mode this model also
|
||||
# registers the discrete GPU's backlight (nvidia_0), which moves nothing. Writable by the video group
|
||||
# through the module's udev rule, so the vendor-key trigger needs no root.
|
||||
set -u
|
||||
STEP=5
|
||||
dev=""
|
||||
for d in /sys/class/backlight/*; do
|
||||
[ -e "$d" ] || continue
|
||||
case "$(readlink -f "$d")" in *-eDP-*) dev=$d; break ;; esac
|
||||
done
|
||||
if [ -z "$dev" ]; then
|
||||
for d in /sys/class/backlight/*; do [ -e "$d" ] && { dev=$d; break; }; done
|
||||
fi
|
||||
[ -n "$dev" ] || { echo "zephyrus-backlight: no backlight" >&2; exit 1; }
|
||||
cur=$(cat "$dev/brightness")
|
||||
max=$(cat "$dev/max_brightness")
|
||||
pct=$(( cur * 100 / max ))
|
||||
case "${1:-}" in
|
||||
+|up|Up) pct=$(( pct + STEP )) ;;
|
||||
-|down|Down) pct=$(( pct - STEP )) ;;
|
||||
''|*[!0-9]*) echo "usage: zephyrus-backlight + | - | PERCENT" >&2; exit 2 ;;
|
||||
*) pct=$1 ;;
|
||||
esac
|
||||
(( pct < 1 )) && pct=1
|
||||
(( pct > 100 )) && pct=100
|
||||
new=$(( max * pct / 100 ))
|
||||
(( new < 1 )) && new=1
|
||||
printf '%s' "$new" >"$dev/brightness" || exit 1
|
||||
exec "$(dirname "$0")/zephyrus-notify" 5555 "Brightness: ${pct}%"
|
||||
Vendored
Executable
+41
@@ -0,0 +1,41 @@
|
||||
#!/bin/bash
|
||||
# zephyrus-display primary | order — the laptop's internal panel among the outputs.
|
||||
# Shipped by the mesh's asus-zephyrus-g14 module; edit the catalogue.
|
||||
#
|
||||
# primary makes the internal panel X's primary output, where the bars' tray goes.
|
||||
# order the display key (Fn+F9, which the firmware sends as Super+P): odd workspaces to the
|
||||
# internal panel, even ones to the first external output, or all to the panel when it
|
||||
# is alone. The predecessor's orden-workspaces.
|
||||
#
|
||||
# The panel is found, not named: the connected output whose name starts with eDP. The predecessor
|
||||
# wrote eDP-1, which is what this model calls it today and not a promise.
|
||||
set -u
|
||||
here=$(dirname "$0")
|
||||
panel=$(xrandr --query 2>/dev/null | awk '$2 == "connected" && $1 ~ /^eDP/ { print $1; exit }')
|
||||
[ -n "$panel" ] || { echo "zephyrus-display: no internal panel connected" >&2; exit 1; }
|
||||
case "${1:-}" in
|
||||
primary)
|
||||
exec xrandr --output "$panel" --primary
|
||||
;;
|
||||
order)
|
||||
external=$(xrandr --listmonitors 2>/dev/null | awk -v p="$panel" 'NR > 1 && $NF != p { print $NF; exit }')
|
||||
[ -n "$external" ] || external=$panel
|
||||
# i3's workspace list, one object per workspace; num and output read from each. No jq: the
|
||||
# fields are flat strings and numbers, and rect, the only nested value, holds neither name.
|
||||
i3-msg -t get_workspaces 2>/dev/null | sed 's/},{"id"/}\n{"id"/g' |
|
||||
while read -r ws; do
|
||||
num=$(printf '%s' "$ws" | grep -o '"num":-\?[0-9]*' | cut -d: -f2)
|
||||
out=$(printf '%s' "$ws" | grep -o '"output":"[^"]*"' | cut -d'"' -f4)
|
||||
[ -n "$num" ] && [ "$num" -ge 0 ] || continue
|
||||
if [ $((num % 2)) -eq 0 ]; then dest=$external; else dest=$panel; fi
|
||||
[ "$out" = "$dest" ] && continue
|
||||
i3-msg "workspace number $num; move workspace to output $dest" >/dev/null
|
||||
done
|
||||
if [ "$external" = "$panel" ]; then
|
||||
"$here/zephyrus-notify" 7780 "Workspaces: all on the panel"
|
||||
else
|
||||
"$here/zephyrus-notify" 7780 "Workspaces: odd on the panel, even on $external"
|
||||
fi
|
||||
;;
|
||||
*) echo "usage: zephyrus-display primary | order" >&2; exit 2 ;;
|
||||
esac
|
||||
Vendored
Executable
+20
@@ -0,0 +1,20 @@
|
||||
#!/bin/bash
|
||||
# zephyrus-kbd-notify — shows the keyboard backlight's level when it changes. The level itself is set
|
||||
# by the firmware and asusd (Fn+F2/F3), which tell UPower; this only listens and notifies. Started once
|
||||
# per session from the module's i3 fragment. Shipped by the mesh's asus-zephyrus-g14 module.
|
||||
#
|
||||
# One instance per session: i3 runs its `exec` lines again on an in-place restart, and the
|
||||
# predecessor's listener ran twice after one, showing every change twice.
|
||||
set -u
|
||||
here=$(dirname "$0")
|
||||
lock="${XDG_RUNTIME_DIR:-/run/user/$(id -u)}/zephyrus-kbd-notify.lock"
|
||||
exec 9>"$lock"
|
||||
flock -n 9 || exit 0
|
||||
levels=(Off Low Med High)
|
||||
dbus-monitor --system "type='signal',interface='org.freedesktop.UPower.KbdBacklight',member='BrightnessChanged'" 2>/dev/null |
|
||||
while read -r line; do
|
||||
if [[ $line =~ int32\ ([0-9]+) ]]; then
|
||||
v=${BASH_REMATCH[1]}
|
||||
"$here/zephyrus-notify" 5556 "Keyboard: ${levels[$v]:-$v}"
|
||||
fi
|
||||
done
|
||||
+27
@@ -0,0 +1,27 @@
|
||||
#!/bin/bash
|
||||
# zephyrus-media play-pause | next | previous — the media keys, through MPRIS (playerctl), with a short
|
||||
# notification of what happened. Shipped by the mesh's asus-zephyrus-g14 module; edit the catalogue.
|
||||
#
|
||||
# From the predecessor's media-control, kept: the lock against a double fire (the vendor keys can
|
||||
# repeat), and the notification. Dropped: its fallback to a media server's local API, which needed a
|
||||
# token from a file of secrets (novox/hq research 027 question 2). A player that speaks MPRIS is
|
||||
# reached; one that does not says so.
|
||||
set -u
|
||||
here=$(dirname "$0")
|
||||
action=${1:-play-pause}
|
||||
case "$action" in play-pause | next | previous) ;; *) echo "usage: zephyrus-media play-pause | next | previous" >&2; exit 2 ;; esac
|
||||
lock="${XDG_RUNTIME_DIR:-/run/user/$(id -u)}/zephyrus-media.lock"
|
||||
exec 9>"$lock"
|
||||
flock -n 9 || exit 0
|
||||
if ! playerctl status >/dev/null 2>&1; then
|
||||
"$here/zephyrus-notify" 7777 "Media: no player"
|
||||
exit 0
|
||||
fi
|
||||
playerctl "$action" 2>/dev/null
|
||||
if [ "$action" = play-pause ]; then
|
||||
sleep 0.2
|
||||
[ "$(playerctl status 2>/dev/null)" = Playing ] && label=Playing || label=Paused
|
||||
else
|
||||
label=${action^}
|
||||
fi
|
||||
"$here/zephyrus-notify" 7777 "Media: $label"
|
||||
Vendored
Executable
+12
@@ -0,0 +1,12 @@
|
||||
#!/bin/bash
|
||||
# zephyrus-notify ID SUMMARY — a short desktop notification that replaces the previous one with the
|
||||
# same ID, through the session's notification service on its bus. busctl is the service manager's
|
||||
# own client, so nothing is installed for it. Shipped by the mesh's asus-zephyrus-g14 module.
|
||||
set -u
|
||||
id=${1:-0}
|
||||
summary=${2:-}
|
||||
uid=$(id -u)
|
||||
DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/${uid}/bus" \
|
||||
busctl --user call org.freedesktop.Notifications /org/freedesktop/Notifications \
|
||||
org.freedesktop.Notifications Notify susssasa{sv}i \
|
||||
asus-zephyrus-g14 "$id" "" "$summary" "" 0 1 urgency y 0 1500 >/dev/null 2>&1 || true
|
||||
Vendored
Executable
+46
@@ -0,0 +1,46 @@
|
||||
#!/bin/bash
|
||||
# zephyrus-session COMMAND [ARG...] — run a command in the operator's graphical session from outside
|
||||
# it: from a vendor-key trigger, which triggerhappy runs as the operator's account but with none of
|
||||
# the session's environment. Shipped by the mesh's asus-zephyrus-g14 module; edit the catalogue.
|
||||
#
|
||||
# What it replaces: the predecessor's `as-user`, which triggerhappy ran as root and which `su`-ed to
|
||||
# a named person with a hard-coded user id and display, and sourced a file of secrets on the way.
|
||||
# Here the account is whoever runs it, the bus is that account's, and the display is the one the
|
||||
# account's own session uses. Nothing is sourced.
|
||||
set -u
|
||||
uid=$(id -u)
|
||||
export XDG_RUNTIME_DIR="/run/user/${uid}"
|
||||
export DBUS_SESSION_BUS_ADDRESS="unix:path=${XDG_RUNTIME_DIR}/bus"
|
||||
home=$(getent passwd "$uid" | cut -d: -f6)
|
||||
[ -n "$home" ] && export HOME="$home"
|
||||
# The session's own window manager says best which display and authority the session uses: read
|
||||
# them from its environment, as the desktop modules' session finder does. Then logind, then any
|
||||
# process of this account that has a display.
|
||||
from_environ() {
|
||||
env=$(tr '\0' '\n' <"/proc/$1/environ" 2>/dev/null) || return 1
|
||||
d=$(printf '%s\n' "$env" | sed -n 's/^DISPLAY=//p' | head -n1)
|
||||
[ -n "$d" ] || return 1
|
||||
export DISPLAY="$d"
|
||||
a=$(printf '%s\n' "$env" | sed -n 's/^XAUTHORITY=//p' | head -n1)
|
||||
[ -n "$a" ] && export XAUTHORITY="$a"
|
||||
return 0
|
||||
}
|
||||
if [ -z "${DISPLAY:-}" ]; then
|
||||
for pid in $(pgrep -xu "$uid" i3 2>/dev/null); do
|
||||
from_environ "$pid" && break
|
||||
done
|
||||
fi
|
||||
if [ -z "${DISPLAY:-}" ]; then
|
||||
for s in $(loginctl list-sessions --no-legend 2>/dev/null | awk -v u="$uid" '$2 == u { print $1 }'); do
|
||||
d=$(loginctl show-session "$s" -p Display --value 2>/dev/null)
|
||||
if [ -n "$d" ]; then export DISPLAY="$d"; break; fi
|
||||
done
|
||||
fi
|
||||
if [ -z "${DISPLAY:-}" ]; then
|
||||
for pid in $(pgrep -u "$uid" 2>/dev/null); do
|
||||
from_environ "$pid" && break
|
||||
done
|
||||
fi
|
||||
: "${XAUTHORITY:=${HOME}/.Xauthority}"
|
||||
export XAUTHORITY
|
||||
exec "$@"
|
||||
Vendored
Executable
+29
@@ -0,0 +1,29 @@
|
||||
#!/bin/bash
|
||||
# zephyrus-touchpad reset | toggle — apply the touchpad's settings again, or switch it on or off.
|
||||
# Shipped by the mesh's asus-zephyrus-g14 module; edit the catalogue.
|
||||
#
|
||||
# The settings themselves are an X input class (/etc/X11/xorg.conf.d/30-asus-zephyrus-g14-touchpad.conf),
|
||||
# which X applies every time the device appears — after a resume too, which is what the predecessor's
|
||||
# sleep hook existed for. This is the manual form, bound to the touchpad key.
|
||||
set -u
|
||||
here=$(dirname "$0")
|
||||
name=$("$here/zephyrus-session" xinput list --name-only 2>/dev/null | grep -m1 -i 'touchpad')
|
||||
[ -n "$name" ] || { echo "zephyrus-touchpad: no touchpad in this session" >&2; exit 1; }
|
||||
x() { "$here/zephyrus-session" xinput "$@"; }
|
||||
case "${1:-reset}" in
|
||||
reset)
|
||||
x set-prop "$name" "libinput Tapping Enabled" 1
|
||||
x set-prop "$name" "libinput Natural Scrolling Enabled" 1
|
||||
x set-prop "$name" "libinput Accel Speed" 0.15
|
||||
x enable "$name"
|
||||
"$here/zephyrus-session" "$here/zephyrus-notify" 7779 "Touchpad: reset"
|
||||
;;
|
||||
toggle)
|
||||
if x list-props "$name" | grep -q 'Device Enabled ([0-9]*):[[:space:]]*1'; then
|
||||
x disable "$name"; "$here/zephyrus-session" "$here/zephyrus-notify" 7779 "Touchpad: off"
|
||||
else
|
||||
x enable "$name"; "$here/zephyrus-session" "$here/zephyrus-notify" 7779 "Touchpad: on"
|
||||
fi
|
||||
;;
|
||||
*) echo "usage: zephyrus-touchpad reset | toggle" >&2; exit 2 ;;
|
||||
esac
|
||||
+46
-41
@@ -1,6 +1,8 @@
|
||||
{
|
||||
"module": "asus-zephyrus-g14",
|
||||
"version": "1",
|
||||
"moved": true,
|
||||
"templates": "templates",
|
||||
"capabilities": [
|
||||
"package-manager",
|
||||
"service-manager"
|
||||
@@ -52,80 +54,85 @@
|
||||
"id": "scripts",
|
||||
"type": "archive",
|
||||
"path": "/usr/local/lib/asus-zephyrus-g14",
|
||||
"artifact": "scripts"
|
||||
"artifact": "scripts",
|
||||
"unknown": "program"
|
||||
},
|
||||
{
|
||||
"id": "nvidia-options",
|
||||
"type": "file",
|
||||
"path": "/etc/modprobe.d/g14-nvidia-power.conf",
|
||||
"mode": "0644",
|
||||
"content": "# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.\n#\n# The discrete GPU's driver options on the ROG Zephyrus G14 (GA403, RTX 40 series, hybrid graphics).\n#\n# NVreg_DynamicPowerManagement=0x00 turns runtime D3 off. With it on, a change of power source sends\n# the driver an ACPI notification it fails to handle on this model (\"RmHandleDNotifierEvent: Failed to\n# handle ACPI D-Notifier event, status=0x62\"), and the GPU stops making progress until the machine is\n# powered off. Off costs a few idle watts in hybrid mode and keeps the machine up.\n#\n# NVreg_PreserveVideoMemoryAllocations=1 saves video memory across suspend, so what used the GPU still\n# works after waking. It needs nvidia-suspend, -hibernate and -resume to run around a sleep, which this\n# module's drop-ins on the sleep services ask for.\n#\n# A change here applies when the driver next loads: at the next boot.\noptions nvidia NVreg_PreserveVideoMemoryAllocations=1\noptions nvidia NVreg_DynamicPowerManagement=0x00\n"
|
||||
"template": "templates/modprobe.d/g14-nvidia-power.conf"
|
||||
},
|
||||
{
|
||||
"id": "video-options",
|
||||
"type": "file",
|
||||
"path": "/etc/modprobe.d/video-brightness-switch.conf",
|
||||
"mode": "0644",
|
||||
"content": "# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.\n#\n# The ACPI video driver does not change the backlight itself on the brightness keys: on this model it\n# moves the wrong one. The keys are triggerhappy's (see /etc/triggerhappy/triggers.d/asus-g14.conf).\n# Applies when the module next loads: at the next boot.\noptions video brightness_switch_enabled=0\n"
|
||||
"template": "templates/modprobe.d/video-brightness-switch.conf"
|
||||
},
|
||||
{
|
||||
"id": "suspend-drop-ins",
|
||||
"type": "directory",
|
||||
"path": "/etc/systemd/system/systemd-suspend.service.d",
|
||||
"mode": "0755"
|
||||
"mode": "0755",
|
||||
"unknown": "program"
|
||||
},
|
||||
{
|
||||
"id": "nvidia-on-suspend",
|
||||
"type": "file",
|
||||
"path": "/etc/systemd/system/systemd-suspend.service.d/asus-zephyrus-g14-nvidia.conf",
|
||||
"mode": "0644",
|
||||
"content": "# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.\n#\n# The NVIDIA driver's own sleep actions, asked for by the sleep itself rather than enabled as\n# links: the mesh declares files and never makes links (novox/hq ADR 0012), and the host's service\n# shape must not start these units by hand, which would put the GPU to sleep with the machine awake.\n[Unit]\nWants=nvidia-suspend.service nvidia-resume.service\n"
|
||||
"template": "templates/systemd/system/systemd-suspend.service.d/asus-zephyrus-g14-nvidia.conf"
|
||||
},
|
||||
{
|
||||
"id": "hibernate-drop-ins",
|
||||
"type": "directory",
|
||||
"path": "/etc/systemd/system/systemd-hibernate.service.d",
|
||||
"mode": "0755"
|
||||
"mode": "0755",
|
||||
"unknown": "program"
|
||||
},
|
||||
{
|
||||
"id": "nvidia-on-hibernate",
|
||||
"type": "file",
|
||||
"path": "/etc/systemd/system/systemd-hibernate.service.d/asus-zephyrus-g14-nvidia.conf",
|
||||
"mode": "0644",
|
||||
"content": "# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.\n#\n# The NVIDIA driver's own sleep actions, asked for by the sleep itself rather than enabled as\n# links: the mesh declares files and never makes links (novox/hq ADR 0012), and the host's service\n# shape must not start these units by hand, which would put the GPU to sleep with the machine awake.\n[Unit]\nWants=nvidia-hibernate.service nvidia-resume.service\n"
|
||||
"template": "templates/systemd/system/systemd-hibernate.service.d/asus-zephyrus-g14-nvidia.conf"
|
||||
},
|
||||
{
|
||||
"id": "suspend-then-hibernate-drop-ins",
|
||||
"type": "directory",
|
||||
"path": "/etc/systemd/system/systemd-suspend-then-hibernate.service.d",
|
||||
"mode": "0755"
|
||||
"mode": "0755",
|
||||
"unknown": "program"
|
||||
},
|
||||
{
|
||||
"id": "nvidia-on-suspend-then-hibernate",
|
||||
"type": "file",
|
||||
"path": "/etc/systemd/system/systemd-suspend-then-hibernate.service.d/asus-zephyrus-g14-nvidia.conf",
|
||||
"mode": "0644",
|
||||
"content": "# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.\n#\n# The NVIDIA driver's own sleep actions, asked for by the sleep itself rather than enabled as\n# links: the mesh declares files and never makes links (novox/hq ADR 0012), and the host's service\n# shape must not start these units by hand, which would put the GPU to sleep with the machine awake.\n[Unit]\nWants=nvidia-suspend-then-hibernate.service nvidia-resume.service\n"
|
||||
"template": "templates/systemd/system/systemd-suspend-then-hibernate.service.d/asus-zephyrus-g14-nvidia.conf"
|
||||
},
|
||||
{
|
||||
"id": "powerd-drop-ins",
|
||||
"type": "directory",
|
||||
"path": "/etc/systemd/system/nvidia-powerd.service.d",
|
||||
"mode": "0755"
|
||||
"mode": "0755",
|
||||
"unknown": "program"
|
||||
},
|
||||
{
|
||||
"id": "powerd-opt-in",
|
||||
"type": "file",
|
||||
"path": "/etc/systemd/system/nvidia-powerd.service.d/asus-zephyrus-g14.conf",
|
||||
"mode": "0644",
|
||||
"content": "# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.\n#\n# nvidia-powerd (Dynamic Boost) was the first error in the chain that hung this model's GPU on a change\n# of power source, and asusd starts it on mains. It runs only when the kernel command line says\n# zephyrus.nvidia-powerd — an explicit opt-in, at boot.\n[Unit]\nConditionKernelCommandLine=zephyrus.nvidia-powerd\n"
|
||||
"template": "templates/systemd/system/nvidia-powerd.service.d/asus-zephyrus-g14.conf"
|
||||
},
|
||||
{
|
||||
"id": "backlight-rule",
|
||||
"type": "file",
|
||||
"path": "/etc/udev/rules.d/90-backlight.rules",
|
||||
"mode": "0644",
|
||||
"content": "# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.\n#\n# The backlights are writable by the video group, so the brightness keys and the module's brightness tool\n# move the panel without root.\nACTION==\"add\", SUBSYSTEM==\"backlight\", RUN+=\"/usr/bin/chgrp video /sys/class/backlight/%k/brightness\", RUN+=\"/usr/bin/chmod g+w /sys/class/backlight/%k/brightness\"\n"
|
||||
"template": "templates/udev/rules.d/90-backlight.rules"
|
||||
},
|
||||
{
|
||||
"id": "udev",
|
||||
@@ -144,14 +151,15 @@
|
||||
"id": "upower-drop-ins",
|
||||
"type": "directory",
|
||||
"path": "/etc/UPower/UPower.conf.d",
|
||||
"mode": "0755"
|
||||
"mode": "0755",
|
||||
"unknown": "program"
|
||||
},
|
||||
{
|
||||
"id": "low-battery",
|
||||
"type": "file",
|
||||
"path": "/etc/UPower/UPower.conf.d/50-asus-zephyrus-g14.conf",
|
||||
"mode": "0644",
|
||||
"content": "# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.\n#\n# On low battery the machine suspends rather than powering off, at 7 % — s2idle still draws a little,\n# so it leaves headroom. A drop-in over the package's own UPower.conf, which stays the package's.\n[UPower]\nUsePercentageForPolicy=true\nPercentageLow=15.0\nPercentageCritical=10.0\nPercentageAction=7.0\nCriticalPowerAction=Suspend\nAllowRiskyCriticalPowerAction=true\n"
|
||||
"template": "templates/UPower/UPower.conf.d/50-asus-zephyrus-g14.conf"
|
||||
},
|
||||
{
|
||||
"id": "upower",
|
||||
@@ -167,14 +175,30 @@
|
||||
"id": "xorg-drop-ins",
|
||||
"type": "directory",
|
||||
"path": "/etc/X11/xorg.conf.d",
|
||||
"mode": "0755"
|
||||
"mode": "0755",
|
||||
"unknown": "program"
|
||||
},
|
||||
{
|
||||
"id": "touchpad",
|
||||
"type": "file",
|
||||
"path": "/etc/X11/xorg.conf.d/30-asus-zephyrus-g14-touchpad.conf",
|
||||
"mode": "0644",
|
||||
"content": "# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.\n#\n# The touchpad's settings, applied by X every time the device appears — at login and after every\n# resume, when the device is initialised again. This replaces the predecessor's sleep hook, which ran\n# xinput after a resume as a named person on a guessed display.\nSection \"InputClass\"\n Identifier \"asus-zephyrus-g14 touchpad\"\n MatchIsTouchpad \"on\"\n Option \"Tapping\" \"on\"\n Option \"NaturalScrolling\" \"true\"\n Option \"AccelSpeed\" \"0.15\"\nEndSection\n"
|
||||
"template": "templates/X11/xorg.conf.d/30-asus-zephyrus-g14-touchpad.conf"
|
||||
}
|
||||
],
|
||||
"items": [
|
||||
{
|
||||
"collection": "shell:after-wake:normal",
|
||||
"template": "templates/after-wake"
|
||||
},
|
||||
{
|
||||
"collection": "contribution:node-hotkeys:trigger",
|
||||
"template": "templates/hotkeys-triggers"
|
||||
},
|
||||
{
|
||||
"collection": "contribution:node-display-session:config",
|
||||
"name": "display-session",
|
||||
"template": "templates/display-session"
|
||||
}
|
||||
],
|
||||
"build": {
|
||||
@@ -194,31 +218,12 @@
|
||||
"name": "scripts",
|
||||
"kind": "archive",
|
||||
"from": "files"
|
||||
},
|
||||
{
|
||||
"name": "templates",
|
||||
"kind": "archive",
|
||||
"from": "templates"
|
||||
}
|
||||
]
|
||||
},
|
||||
"contributions": [
|
||||
{
|
||||
"seat": "node-hotkeys",
|
||||
"kind": "trigger",
|
||||
"content": "# The ROG Zephyrus G14's vendor keys, which reach no X client: media (the M-keys), panel brightness,\n# and the touchpad key. Each runs this module's own script, as the operator's account.\nKEY_PROG1\t1\t/usr/local/lib/asus-zephyrus-g14/bin/zephyrus-session /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-media play-pause\nKEY_PROG3\t1\t/usr/local/lib/asus-zephyrus-g14/bin/zephyrus-session /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-media previous\nKEY_PROG4\t1\t/usr/local/lib/asus-zephyrus-g14/bin/zephyrus-session /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-media next\nKEY_BRIGHTNESSDOWN\t1\t/usr/local/lib/asus-zephyrus-g14/bin/zephyrus-backlight -\nKEY_BRIGHTNESSDOWN\t2\t/usr/local/lib/asus-zephyrus-g14/bin/zephyrus-backlight -\nKEY_BRIGHTNESSUP\t1\t/usr/local/lib/asus-zephyrus-g14/bin/zephyrus-backlight +\nKEY_BRIGHTNESSUP\t2\t/usr/local/lib/asus-zephyrus-g14/bin/zephyrus-backlight +\nKEY_F21\t1\t/usr/local/lib/asus-zephyrus-g14/bin/zephyrus-touchpad reset\n"
|
||||
},
|
||||
{
|
||||
"seat": "node-display-session",
|
||||
"kind": "config",
|
||||
"content": "# The laptop's own lines in i3 (module asus-zephyrus-g14, novox/hq ADR 0208, ADR 0210). Owned by the\n# mesh: replaced at every push. Once the controller places contributions to node-display-session\n# (ADR 0210), these become the module's contribution instead of a file in i3's directory.\n#\n# The keys the firmware turns into ordinary key presses. The vendor keys that reach no X client are\n# triggerhappy's (/etc/triggerhappy/triggers.d/asus-g14.conf): M4 and Fn+F4/F5 for media, Fn+F7/F8 for\n# the panel, Fn+F10 for the touchpad. The keyboard backlight (Fn+F2/F3) is the firmware's and asusd's.\n\n# Fn+F6, the screenshot key: the firmware sends Super+Shift+S. Released before it runs, because the\n# screenshot grabs the pointer to select a region, which fails while the key is still held.\nbindsym --release $mod+Shift+s exec --no-startup-id $XDG_CONFIG_HOME/i3/scripts/screenshot.sh\n\n# Fn+F9, the display key: the firmware sends Super+P. Odd workspaces to the panel, even ones to the\n# external output.\nbindsym $mod+p exec --no-startup-id /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-display order\n\n# The keyboard backlight's level, shown when it changes.\nexec --no-startup-id /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-kbd-notify\n"
|
||||
},
|
||||
{
|
||||
"seat": "node-display-session",
|
||||
"kind": "config",
|
||||
"content": "# The laptop's own lines in i3 (module asus-zephyrus-g14, novox/hq ADR 0208, ADR 0210). Owned by the\n# mesh: replaced at every push. Once the controller places contributions to node-display-session\n# (ADR 0210), these become the module's contribution instead of a file in i3's directory.\n#\n# The model's panel and touchpad.\n\n# The internal panel is the primary output, where the bars' tray goes. Which monitors are on and where\n# is the display server's (autorandr, run at every session start).\nexec --no-startup-id /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-display primary\n\n# The touchpad's settings again, by hand. X applies them itself whenever the device appears.\nbindsym $mod+Shift+x exec --no-startup-id /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-touchpad reset\n"
|
||||
}
|
||||
],
|
||||
"shell": [
|
||||
{
|
||||
"for": "after-wake",
|
||||
"slot": "normal",
|
||||
"code": "# The touchpad's settings again after waking, in the operator's session: X applies the module's\n# input class when the device appears, and this covers a wake that does not initialise it again.\n# Runs as root from the power module; the reset itself runs as the session's owner.\nsleep 2\nowner=$(ps -o user= -C i3 | head -n 1)\n[ -n \"$owner\" ] && runuser -u \"$owner\" -- /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-touchpad reset\ntrue\n"
|
||||
}
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
+11
@@ -0,0 +1,11 @@
|
||||
# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.
|
||||
#
|
||||
# On low battery the machine suspends rather than powering off, at 7 % — s2idle still draws a little,
|
||||
# so it leaves headroom. A drop-in over the package's own UPower.conf, which stays the package's.
|
||||
[UPower]
|
||||
UsePercentageForPolicy=true
|
||||
PercentageLow=15.0
|
||||
PercentageCritical=10.0
|
||||
PercentageAction=7.0
|
||||
CriticalPowerAction=Suspend
|
||||
AllowRiskyCriticalPowerAction=true
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.
|
||||
#
|
||||
# The touchpad's settings, applied by X every time the device appears — at login and after every
|
||||
# resume, when the device is initialised again. This replaces the predecessor's sleep hook, which ran
|
||||
# xinput after a resume as a named person on a guessed display.
|
||||
Section "InputClass"
|
||||
Identifier "asus-zephyrus-g14 touchpad"
|
||||
MatchIsTouchpad "on"
|
||||
Option "Tapping" "on"
|
||||
Option "NaturalScrolling" "true"
|
||||
Option "AccelSpeed" "0.15"
|
||||
EndSection
|
||||
@@ -0,0 +1,7 @@
|
||||
# The touchpad's settings again after waking, in the operator's session: X applies the module's
|
||||
# input class when the device appears, and this covers a wake that does not initialise it again.
|
||||
# Runs as root from the power module; the reset itself runs as the session's owner.
|
||||
sleep 2
|
||||
owner=$(ps -o user= -C i3 | head -n 1)
|
||||
[ -n "$owner" ] && runuser -u "$owner" -- /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-touchpad reset
|
||||
true
|
||||
+30
@@ -0,0 +1,30 @@
|
||||
# The laptop's own lines in i3 (module asus-zephyrus-g14, novox/hq ADR 0208, ADR 0210). Owned by the
|
||||
# mesh: replaced at every push. Once the controller places contributions to node-display-session
|
||||
# (ADR 0210), these become the module's contribution instead of a file in i3's directory.
|
||||
#
|
||||
# The keys the firmware turns into ordinary key presses. The vendor keys that reach no X client are
|
||||
# triggerhappy's (/etc/triggerhappy/triggers.d/asus-g14.conf): M4 and Fn+F4/F5 for media, Fn+F7/F8 for
|
||||
# the panel, Fn+F10 for the touchpad. The keyboard backlight (Fn+F2/F3) is the firmware's and asusd's.
|
||||
|
||||
# Fn+F6, the screenshot key: the firmware sends Super+Shift+S. Released before it runs, because the
|
||||
# screenshot grabs the pointer to select a region, which fails while the key is still held.
|
||||
bindsym --release $mod+Shift+s exec --no-startup-id $XDG_CONFIG_HOME/i3/scripts/screenshot.sh
|
||||
|
||||
# Fn+F9, the display key: the firmware sends Super+P. Odd workspaces to the panel, even ones to the
|
||||
# external output.
|
||||
bindsym $mod+p exec --no-startup-id /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-display order
|
||||
|
||||
# The keyboard backlight's level, shown when it changes.
|
||||
exec --no-startup-id /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-kbd-notify
|
||||
# The laptop's own lines in i3 (module asus-zephyrus-g14, novox/hq ADR 0208, ADR 0210). Owned by the
|
||||
# mesh: replaced at every push. Once the controller places contributions to node-display-session
|
||||
# (ADR 0210), these become the module's contribution instead of a file in i3's directory.
|
||||
#
|
||||
# The model's panel and touchpad.
|
||||
|
||||
# The internal panel is the primary output, where the bars' tray goes. Which monitors are on and where
|
||||
# is the display server's (autorandr, run at every session start).
|
||||
exec --no-startup-id /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-display primary
|
||||
|
||||
# The touchpad's settings again, by hand. X applies them itself whenever the device appears.
|
||||
bindsym $mod+Shift+x exec --no-startup-id /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-touchpad reset
|
||||
+10
@@ -0,0 +1,10 @@
|
||||
# The ROG Zephyrus G14's vendor keys, which reach no X client: media (the M-keys), panel brightness,
|
||||
# and the touchpad key. Each runs this module's own script, as the operator's account.
|
||||
KEY_PROG1 1 /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-session /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-media play-pause
|
||||
KEY_PROG3 1 /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-session /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-media previous
|
||||
KEY_PROG4 1 /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-session /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-media next
|
||||
KEY_BRIGHTNESSDOWN 1 /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-backlight -
|
||||
KEY_BRIGHTNESSDOWN 2 /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-backlight -
|
||||
KEY_BRIGHTNESSUP 1 /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-backlight +
|
||||
KEY_BRIGHTNESSUP 2 /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-backlight +
|
||||
KEY_F21 1 /usr/local/lib/asus-zephyrus-g14/bin/zephyrus-touchpad reset
|
||||
Vendored
+16
@@ -0,0 +1,16 @@
|
||||
# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.
|
||||
#
|
||||
# The discrete GPU's driver options on the ROG Zephyrus G14 (GA403, RTX 40 series, hybrid graphics).
|
||||
#
|
||||
# NVreg_DynamicPowerManagement=0x00 turns runtime D3 off. With it on, a change of power source sends
|
||||
# the driver an ACPI notification it fails to handle on this model ("RmHandleDNotifierEvent: Failed to
|
||||
# handle ACPI D-Notifier event, status=0x62"), and the GPU stops making progress until the machine is
|
||||
# powered off. Off costs a few idle watts in hybrid mode and keeps the machine up.
|
||||
#
|
||||
# NVreg_PreserveVideoMemoryAllocations=1 saves video memory across suspend, so what used the GPU still
|
||||
# works after waking. It needs nvidia-suspend, -hibernate and -resume to run around a sleep, which this
|
||||
# module's drop-ins on the sleep services ask for.
|
||||
#
|
||||
# A change here applies when the driver next loads: at the next boot.
|
||||
options nvidia NVreg_PreserveVideoMemoryAllocations=1
|
||||
options nvidia NVreg_DynamicPowerManagement=0x00
|
||||
+6
@@ -0,0 +1,6 @@
|
||||
# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.
|
||||
#
|
||||
# The ACPI video driver does not change the backlight itself on the brightness keys: on this model it
|
||||
# moves the wrong one. The keys are triggerhappy's (see /etc/triggerhappy/triggers.d/asus-g14.conf).
|
||||
# Applies when the module next loads: at the next boot.
|
||||
options video brightness_switch_enabled=0
|
||||
+7
@@ -0,0 +1,7 @@
|
||||
# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.
|
||||
#
|
||||
# nvidia-powerd (Dynamic Boost) was the first error in the chain that hung this model's GPU on a change
|
||||
# of power source, and asusd starts it on mains. It runs only when the kernel command line says
|
||||
# zephyrus.nvidia-powerd — an explicit opt-in, at boot.
|
||||
[Unit]
|
||||
ConditionKernelCommandLine=zephyrus.nvidia-powerd
|
||||
+7
@@ -0,0 +1,7 @@
|
||||
# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.
|
||||
#
|
||||
# The NVIDIA driver's own sleep actions, asked for by the sleep itself rather than enabled as
|
||||
# links: the mesh declares files and never makes links (novox/hq ADR 0012), and the host's service
|
||||
# shape must not start these units by hand, which would put the GPU to sleep with the machine awake.
|
||||
[Unit]
|
||||
Wants=nvidia-hibernate.service nvidia-resume.service
|
||||
+7
@@ -0,0 +1,7 @@
|
||||
# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.
|
||||
#
|
||||
# The NVIDIA driver's own sleep actions, asked for by the sleep itself rather than enabled as
|
||||
# links: the mesh declares files and never makes links (novox/hq ADR 0012), and the host's service
|
||||
# shape must not start these units by hand, which would put the GPU to sleep with the machine awake.
|
||||
[Unit]
|
||||
Wants=nvidia-suspend-then-hibernate.service nvidia-resume.service
|
||||
+7
@@ -0,0 +1,7 @@
|
||||
# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.
|
||||
#
|
||||
# The NVIDIA driver's own sleep actions, asked for by the sleep itself rather than enabled as
|
||||
# links: the mesh declares files and never makes links (novox/hq ADR 0012), and the host's service
|
||||
# shape must not start these units by hand, which would put the GPU to sleep with the machine awake.
|
||||
[Unit]
|
||||
Wants=nvidia-suspend.service nvidia-resume.service
|
||||
Vendored
+5
@@ -0,0 +1,5 @@
|
||||
# Managed by the mesh (module asus-zephyrus-g14). Replaced on every push; edit the catalogue instead.
|
||||
#
|
||||
# The backlights are writable by the video group, so the brightness keys and the module's brightness tool
|
||||
# move the panel without root.
|
||||
ACTION=="add", SUBSYSTEM=="backlight", RUN+="/usr/bin/chgrp video /sys/class/backlight/%k/brightness", RUN+="/usr/bin/chmod g+w /sys/class/backlight/%k/brightness"
|
||||
Reference in New Issue
Block a user