jschoubben
02f1fcc865
ADR 0060, built. `make hosts` produces mesh-host-arch, mesh-host-alpine and mesh-host-android, each pinned to its system at link time. The claim that "almost all of it is shared" held up. All 36 existing apply tests pass unchanged -- the only edit was naming which system they run against, which was previously implicit. What moved into internal/system is two appliers' worth of code and the probes that go with them. Each system's differences are real and needed re-deriving rather than translating: apk reports absence by EMPTY OUTPUT and exits zero either way, where pacman exits non-zero. Reading apk's exit code the way pacman's is read reports every package as installed. That is the single most dangerous difference between the two and it is invisible until it bites. OpenRC has no LoadState, so "the service does not exist" is read from its prose rather than a field. Same distinction, different evidence -- and this is exactly what an interface spanning both would have had to drop, which is why 0060 rejected one. OpenRC has no is-enabled either. Boot state comes from the runlevel listing: "does it start at boot" becomes "does it appear in rc-update show default". Android is a partial host and that is the point. It implements file, directory and action -- the shapes needing only a filesystem and a way to run something -- and refuses the other three by name, before anything is applied. Its unreachable appliers return ErrUnsupported rather than a zero value, so "unreachable" fails loudly if it stops being true. A host also confirms it is on the machine it was built for, once, at the start. The alpine host on this Arch machine says "this machine is not Alpine" instead of failing later inside a package manager that is not there. And a host built without -X main.builtFor refuses everything, naming the hosts that exist. Two test problems found by injecting faults. One injection did not compile, so the check now reports that separately from a pass. The other passed with the behaviour removed: the missing-service assertion matched "does not exist", which the FALL-THROUGH error also contains because it echoes the raw output. It now asserts the diagnosis, which only the correct branch produces. Verified with the real binaries: android refuses a package naming what it does support; alpine on Arch refuses the machine; arch applies and is idempotent; a system-less build refuses everything.
mesh-host
Tier 0 of the Novox Mesh. The one thing ever installed by hand, and the only thing that changes a machine.
scp mesh-host root@machine:/usr/local/bin/
mesh-host profile
That is the whole installation. One statically linked binary, nothing else present, no runtime
to install first (novox/hq ADR 0041).
What it is for
Apply declared state on this machine. Overlay membership, packet filtering, packages, services, containers and filesystems are not six concerns it carries; they are six instances of the one.
It does not decide. Anything needing knowledge of another node is the control plane's, and the host never queries the mesh database. It receives declarations and applies them.
What exists today
Stages 1 and 2. It reports what a machine is, and it applies a declaration to one. It connects to nothing and listens on nothing — what it applies comes from a file.
mesh-host profile what this machine can be asked to do
mesh-host inventory what this machine is, and what it holds
mesh-host apply FILE make this machine match a declaration from a file
mesh-host reconcile make this machine match the declaration this host carries
mesh-host bundle show what this host carries
mesh-host owned what this host has applied and still owns
--json machine-readable
--state where this node keeps what it knows
--dry-run read and check the declaration, change nothing
$ mesh-host profile
linux/amd64
yes container-runtime 29.7.2
no firewall nft exited 1: Operation not permitted (you must be root)
yes graphical-session x11: :1
yes overlay wg0
yes package-manager pacman 7.1.0
no privileged effective uid 1000, not 0
yes service-manager degraded
cannot be asked to: [firewall privileged]
Applying
A declaration is JSON, versioned, and an ordered list of resources — the order is stated
rather than derived, because deriving it would be the host deciding
(novox/hq ADR 0043). The vocabulary is directory, file
and service, and anything outside it refuses the whole declaration: a host that skipped
what it did not understand would apply most of a declaration and report success.
{"declaration":1,"resources":[
{"id":"mesh-etc","type":"directory","path":"/etc/mesh","mode":"0755"},
{"id":"node-conf","type":"file","path":"/etc/mesh/node.conf","content":"role = anchor\n","mode":"0640"},
{"id":"journal","type":"service","unit":"systemd-journald.service","state":"running"}
]}
It converges rather than executes. Applying twice changes nothing the second time; applying to a drifted machine returns it. A mode is maintained, not merely set — a permission applied at creation is not a permission held.
It owns a footprint, and only that. What it applied and is no longer declared is removed; what it did not create is never touched. It knows which is which because it recorded what it did, after each thing worked.
A failed step fails the apply. No step runs after a failure, and the error carries what had already been done — the machine is in whatever state that left it, and pretending otherwise is the fault this exists to prevent.
The bundle a host carries
A host built for a machine carries its declaration inside the binary:
make host BUNDLE=path/to/substrate.lock
mesh-host reconcile then applies it. That is the first node's path — no mesh present, nothing
fetched, nothing else copied onto the machine. copy it and run it stops being true the moment
a second file has to arrive with it, which is why the bundle is embedded rather than beside it.
A default build carries nothing and refuses to reconcile, saying so. A host that applied nothing and reported success would look exactly like one that raised a first node, and the difference would surface later as a mesh that never came up with nothing to point at.
Stages 3 and 4 — the link, and enrolment — are designed and not built.
What stage 2 does not yet prove
The design defines stage 2 as the host applies substrate.lock with no mesh present, and
calls out the claim underneath it: that one host can raise the substrate alone.
The mechanism is proved — a sealed machine, one binary, and it configures itself from what it carries. The claim is not. The substrate is four container services, and:
- the vocabulary has no container type, because a container needs an image and where images
come from is open (
novox/hqresearch 012); - what belongs in a substrate is not known — the closure for a one-node mesh is what research 011 and 012 exist to answer;
- and the machine used to test this has no container runtime, because a sealed network cannot install one.
So substrate.lock here is a real bundle with a placeholder's content. Saying that plainly
beats shipping a host that claims a substrate it has never raised.
A capability is detected, never assumed
The reason this is the first thing built rather than a detail of it.
An installed package is not a capability. A container client on disk with its daemon down looks exactly like a working runtime, and a node assigned work on that basis fails at the moment the work arrives. So every detector runs something that only succeeds if the thing is functioning — the daemon is asked for its version, the package database is queried, the firewall is asked to list a ruleset, which needs the privilege as well as the tool.
Every verdict says how it knows. A capability reported absent with no reason is a fault nobody can act on. The reason is what a person reads when a node will not take work they expected it to take.
A unit that does not exist is not a unit that is stopped. systemctl is-active says
inactive for both, so declaring a unit stopped reported success for a unit the host cannot
manage at all. LoadState separates them. Found by applying inside a raised machine, not by
reasoning — and its sibling: removing an orphaned service whose unit has since been uninstalled
used to fail the whole apply, which left a node able to apply nothing, ever.
Exit codes are not the whole answer. Found by running against a real machine rather than by
reasoning: systemctl is-system-running exits non-zero for every state except running —
including degraded, which means some units failed and the init is emphatically there. Reading
the exit code reported no service manager on a machine whose init it was. That is the same
fault in the mirror — installed-but-broken reported present, working-but-imperfect reported
absent — and both place work wrongly.
Building
go test ./... structure and logic, and the same checks against this machine
CGO_ENABLED=0 go build -ldflags="-s -w" -o mesh-host ./cmd/mesh-host
Roughly 3 MB, static, no dynamic dependencies. Cross-compiles with GOOS/GOARCH; a host is
built once per architecture and copied, never built on the machine it runs on.
Mocking the boundary is forbidden (novox/hq ADR 0034).
Every detector is exercised against a fake runner for its logic and against this machine for
its behaviour. The tests do not assert which capabilities a machine has — that varies, and is
the point of detecting — they assert that detection tells the truth about whatever is there.
Where the reasoning lives
Design and decisions are in novox/hq, not here. This
repository carries implementation and does not carry decisions.
03-DESIGN/01-to-be/05-the-node-host.md— what this is and the order it is built in02-DECISIONS/0037-the-host-applies-it-does-not-decide.md— the one concern02-DECISIONS/0038-a-node-joins-by-linking-first.md— one behaviour, two sources02-DECISIONS/0039-the-link-is-the-security-boundary.md— a node owns no password02-DECISIONS/0041-the-host-depends-on-nothing.md— why this is a static binary, and Go04-ISSUES/007-an-installed-package-is-not-a-capability— why detection works this way