Merge pull request 'Playbooks 01 and 02: place research in the domains; its words reach the glossary at graduation' (#382) from playbooks/01-place-it-in-the-domains into main

Reviewed-on: #382

00-META/glossary.md

@@ -69,7 +69,8 @@ is listed under [Homonyms](#homonyms), with the qualified form each domain uses.
 **Recorded in** the catalogue, one manifest per module. **Upstream of** every other domain; its words
 are a published vocabulary, fixed by the manifest's schema. **Decided by** ADR 0040, 0126, 0174, 0188,
 0207, 0236, 0262.
-**Uses:** module, seat, provision (Provisioning), data class (Data), health (Health and repair).
+**Uses:** module, seat, config value (Config), provision (Provisioning), data class (Data), health (Health
+and repair).
 
 - **manifest** — the file a module is defined by (`module.json`): what it is, what it provides and
   requires, the seats it claims, the resources it declares, its tools, its data and its health. Say
@@ -83,18 +84,9 @@ are a published vocabulary, fixed by the manifest's schema. **Decided by** ADR 0
   it guards: the `mesh-controller`, `postgres` and `nats` modules claim the `mesh-controller`,
   `mesh-store` and `mesh-broker` seats (ADR 0079,
   ADR 0116).
-- **setting** — a value a manifest declares and an assignment gives, one of the two ways a node varies
-  a module (ADR 0174).
-  What a "flavor" once varied is a setting or a separate module.
-  *Not:* ~~flavor~~
-- **preference** — a setting whose manifest gives it a default, because its value is true of the
-  software and only tuned per node: a font size, a width
-  (ADR 0262).
-  A setting with no default is the operator's own value: a domain, an identity.
-  *Not:* ~~tunable~~ (hq)
 - **kept region** — a marked block in a managed file the mesh writes *into*, where the operator's own
   lines survive every send and are given back when the module goes (ADR 0174). The other way a node
-  varies a module.
+  varies a module, besides a config value; a **managed** file's marked block is one (Provisioning).
 - **bundle** — the artifact a module's own code is built into — its tools, a seat's implementation, a
   daemon — in any language the mesh has a toolchain for; never an image. A **tools bundle** speaks MCP to
   the tool runner. One module may declare several
@@ -111,6 +103,55 @@ are a published vocabulary, fixed by the manifest's schema. **Decided by** ADR 0
   (ADR 0236).
   The controller's verb `upgrade` shows it.
 
+## Config — the values someone may change
+
+**Purpose.** To hold, check and resolve every value a module reads that someone may change, and to say
+where each resolved value came from. **Recorded by** the `mesh-config` module, in its buckets on the bus,
+with its store as the history behind them. **Upstream of** Provisioning, which places the values;
+downstream of Module and Placement. **Decided by** ADR 0262, 0277, 0348.
+**Uses:** module, node, manifest (Module), assignment (Placement), provision (Provisioning), proposal
+(Operator and conversation).
+
+- **config value** — anything a module reads that someone may change: a font size, a domain, an address.
+  A module declares every one it reads under `config` in its manifest, with a type, a description,
+  validation, whether it is trusted, optionally the predefined key it falls back to, and a default or
+  `required`; it lands in a template file as `${config:<key>}` or is read by the module's code at runtime.
+  It resolves from four sources, the most specific winning: the default in the manifest; **mesh config**,
+  the value of the predefined key it falls back to for the whole mesh; **node config**, that key's value
+  on one node; and **module-assignment config**, the module's own value on one node. There is no module
+  value for the whole mesh. *Config* is the concept, the verb (`config`) and the manifest field
+  (ADR 0348). Mesh config is a source level, the value set for the whole mesh; `mesh-config` is the module
+  that keeps every level. The controller holds, mirrors and resolves no config value (ADR 0348 §9).
+  Older records and documents say "setting" for a config value and "settings" for the concept; new writing
+  says config value and config. The word goes on this entry's *Not:* line once the documents in force that
+  still use it in running prose are reworded, which is issue 683; until then it is checked by review. The
+  manifest field and the verb "settings" are kept as aliases until every module has moved (ADR 0348 §1,
+  issue 630), and are named on the line below with the rest once issue 683 is done.
+  *Identifier until renamed:* `takes-settings`, `${setting:}` — manifest forms kept as aliases until every
+  module has moved to their config names (ADR 0348 §1, issue 630).
+  What a "flavor" once varied is a config value or a separate module.
+  *Not:* ~~flavor~~
+- **predefined key** — a key of the catalogue's `predefined.json`, the fixed list of keys for which mesh
+  config and node config hold values, each with its type, description, validation and whether it is
+  trusted, such as `font-size`. A config value may name the predefined key it falls back to, of its own
+  type; one that names none resolves from its default and the module's own value only. The list is the
+  catalogue build's: a change to it is validated with every manifest naming a key, and removing a key still
+  named or still holding a value is refused (ADR 0348).
+- **trusted** — said of a config value that decides what runs or who can reach what. At every level it is
+  set only at the controller's terminal or through `config` with propose, on the operator's Approve; a
+  module value that falls back to a trusted predefined key is itself trusted (ADR 0277, ADR 0348 §8). Not
+  the trusted sender of an operator message (see [Homonyms](#homonyms)).
+- **preference** — a config value whose manifest gives it a default, because its value is true of the
+  software and only tuned per node: a font size, a width
+  (ADR 0262).
+  A config value with no default is `required`: the operator's own value, such as a domain or an
+  identity, and while nothing sets it the module's files are not written (ADR 0348).
+  *Not:* ~~tunable~~ (hq)
+- **`mesh-config`** — the module that owns every config value, and not the source level mesh config: it
+  holds the seat `mesh-config` once for the mesh, validates, takes a trusted value only from the
+  controller's terminal or the operator's Approve, keeps the history with who set it and why, and resolves
+  the four sources (ADR 0348).
+
 ## Core — the mesh's own machinery
 
 **Purpose.** To keep the controller, the bus, the store and every node's engine running and agreed, so
@@ -190,9 +231,10 @@ every other domain has something to run on. **Recorded by** the controller and t
 **Purpose.** To decide, send and apply what each node runs, and to say why.
 **Recorded by** the controller's `inventory` database. **Upstream of** Provisioning, Connectivity, Data
 and Health and repair. **Decided by** ADR 0100, 0126, 0176, 0181, 0207, 0221, 0252, 0261.
-**Uses:** node, machine, module, seat, setting (Module), manifest (Module).
+**Uses:** node, machine, module, seat, manifest (Module), config value (Config).
 
-- **assignment** — a module put on a node, with the settings that node gives it.
+- **assignment** — a module put on a node. Its config values on that node (module-assignment config,
+  Config) are `mesh-config`'s, never part of what the controller records (ADR 0348 §9).
 - **pending assignment** — an assignment of a module whose build is still running, kept, and made by the
   controller when that build registers the module, or ended with why when it does not
   (ADR 0261).
@@ -227,7 +269,7 @@ and Health and repair. **Decided by** ADR 0100, 0126, 0176, 0181, 0207, 0221, 02
   (ADR 0181).
   Not a name a manifest carries.
 - **agent account** — the login every coding agent on a node runs as, when the node names one of its own;
-  stated on the node record at the controller's terminal, never by a verb or a setting. Empty means agents
+  stated on the node record at the controller's terminal, never by a verb or a config value. Empty means agents
   run as the operator account. It cannot become root without a person, and the node-engine judges that on
   every look (ADR 0266).
 - **account group** — a group of the machine's group database that a module puts an account in, by
@@ -238,15 +280,21 @@ and Health and repair. **Decided by** ADR 0100, 0126, 0176, 0181, 0207, 0221, 02
 
 ## Provisioning — one module serving another
 
-**Purpose.** To resolve which module serves a provision for which consumer, and to wire the two.
-**Recorded by** the controller. **Upstream of** Data; downstream of Module, Placement and Identity.
-**Decided by** ADR 0027, 0084, 0138, 0225, 0230, 0263.
-**Uses:** module, seat, credential (Identity and access).
+**Purpose.** To resolve which module serves a provision for which consumer, to wire the two, and to
+place every value a module needs into its files on its node. **Recorded by** the controller and
+`mesh-provisioner`. **Upstream of** Data; downstream of Module, Placement, Config and Identity.
+**Decided by** ADR 0027, 0084, 0138, 0225, 0230, 0263, 0349.
+**Uses:** module, seat, node-engine (Core), declaration (Placement), config value (Config), credential
+and vault (Identity and access).
 
 - **provision** — a service one module `provides` and others `require`; the mesh resolves a provider
   and wires the two with an endpoint and a credential. A provision is a service you offer, a seat is a
   role you occupy, and the two meet where a seat delivers a provision: occupying the seat is what makes
   a module *the* provider of it.
+  Every value a module needs is a provision from the domain that owns it: placement from the controller,
+  config values from `mesh-config`, shared secrets from the vault, a consumer's values from the module
+  providing it, an item of a collection from its contributor. A module says only what it needs and where
+  it lands (ADR 0349).
 - **provider** and **consumer** — the module that provides a provision, and the module that requires
   it. Which of several providers serves a consumer is resolved
   (ADR 0084).
@@ -264,6 +312,28 @@ and Health and repair. **Decided by** ADR 0100, 0126, 0176, 0181, 0207, 0221, 02
   node seat `node-mounts`, as a mount unit and an automount unit, mounted on access (ADR 0263).
 - **occasional source** — a share on a device that is not a node and comes and goes, such as a USB disk;
   its absence is a state, *not present*, never a fault (ADR 0263).
+- **mesh-provisioner** — the module that places provisions on the nodes: it holds the seat
+  `mesh-provisioner` once for the mesh, keeping which domain answers which kind of placeholder, what each
+  module on each node needs, what is applied where and the items of every collection, and the seat
+  `node-provisioner` on every node, which its provisioner client serves (ADR 0349).
+- **provisioner client** — mesh-provisioner's part on one node. For each module there it reads the
+  placeholders of its template files, records the needs, watches each owner's values for the node, fills a
+  template only once every value is there, has the node-engine write the file through a narrow local verb,
+  makes the program take the change as the file declares (`restart-on`, `reload-on`, `read-on-use`), and
+  reports `prov.applied`. It runs as a service with a bus account of its own, never in the tool runner
+  (ADR 0349).
+- **collection** — a provision with many providers. The **collector**, a module that takes additions from
+  others (a shell's snippets, a bar's blocks), requires it; each **contributor** ships its **item** as a
+  template in its own repository and provides it. The provisioner client fills the collector's template
+  from the items of the contributors placed on its node, and an item goes when its contributor leaves the
+  node (ADR 0349).
+- **owned** — a placed file that is the mesh's whole: the provisioner writes it back whenever it differs.
+  It is one of three answers a manifest gives for each file it places (`owner-at-runtime`): **owned**,
+  **seed** or **managed**. Whichever it is, the file has one writer: the node-engine writes it only on the
+  provisioner client's word (ADR 0349).
+- **seed** — a placed file the provisioner writes once; from then on it is the program's.
+- **managed** — a placed file of which only its named keys or a marked block (a kept region, Module) are
+  the mesh's; the program keeps the rest.
 
 ## Identity and access — who may do what
 
@@ -278,7 +348,7 @@ and the operator act. **Recorded by** the controller's `identity` and `licences`
 - **secret** — a credential or other value the vault keeps sealed and the node-engine unseals into a
   file at apply (ADR 0085).
 - **secret family** — a module's own secrets declared as one name ending in `-*`; each member is the prefix
-  and a name (`smb-password-<source>`, one per source the module's settings name), given by its full name
+  and a name (`smb-password-<source>`, one per source the module's config values name), given by its full name
   and never made by the mesh
   (ADR 0283).
 - **vault** — the module that owns every secret (`mesh-vault`,
@@ -364,6 +434,9 @@ planner, the rollout). **Downstream of** Module, Core, Health and repair and Dat
 - **delivery group** — two or more deliveries sharing a pull request head branch name across the mesh's
   repositories, delivered as one unit in an order declared (`after:`) or inferred by the planner. One
   level: a group holds deliveries, never groups. Its state is derived from its members, never set.
+- **release branch** — a branch other than `main`, shared by name across repositories, that collects a feature's
+  merged work and is brought into `main` as one delivery (design 57's `feat/57-config-and-provisioning`). While it
+  is in flight, a change that touches its files waits for it (playbook 07, *Is the coast clear?*).
 - **delivery plan** — what a delivery does to the mesh: its **build plan** (the modules it moves and
   their dependents, in tiers), its **deploy plan** (per node, what it receives and what waits for a
   person) and its verdict (the composed nodes, the replays). Computed by the controller's planner from a
@@ -422,7 +495,7 @@ becomes a message). **Decided by** ADR 0227, 0231, 0240, 0252, 0283.
   running session, started before, does not have that group yet. Said by the node-engine as the module's
   resource of kind `account`; it clears at the first look after a new login (ADR 0252).
 - **waiting** — a resource's health when its module's tool check says it waits for the operator: a named own
-  secret or setting of the module, not given yet, without which a part cannot work. Not a fault: the
+  secret or config value of the module, not given yet, without which a part cannot work. Not a fault: the
   controller checks it and says it as the condition `needs-operator`, naming the act, and the first-node gate
   reads it as *waits for a person*
   (ADR 0283).
@@ -546,7 +619,7 @@ asking, never the act. **Decided by** ADR 0152, 0175, 0234, 0259, 0272.
   published for that asker alone. The only thing an asker acts on (ADR 0259).
 - **proposal** — a change an agent, or anyone the bus admits, puts forward through a verb and that takes
   effect only on the operator's warrant, bound to the exact thing shown: a shared instruction section (ADR
-  0274), a trusted setting's layer (ADR 0277).
+  0274), a trusted config value (ADR 0277, ADR 0348).
   A proposal changes nothing by itself; declined, expired or refused, it is discarded.
 - **approval mark** — a tool's or verb's declaration in its manifest (`needs-approval`) that each call to it runs
   only on the operator's warrant for that one call, with its exact arguments; the tool runner that serves it, or
@@ -563,7 +636,7 @@ asking, never the act. **Decided by** ADR 0152, 0175, 0234, 0259, 0272.
   build seat's holder, whose seat name `node-build-agent` is an identifier to rename.
 - **instruction section** — one named section of the managed instruction file, which every agent session on the
   nodes it is for reads first, as the mesh's word: set at the controller's terminal in the agent module's
-  settings, or **proposed** by an agent and made active on each node only by the operator's warrant, which that node
+  config, or **proposed** by an agent and made active on each node only by the operator's warrant, which that node
   proves itself (ADR 0274). A hand-over between sessions is one.
 - **personal rule** — one short text in the operator's own words about how the operator wants their agent
   to work with them, registered for the operator (the **operator scope** of the agent module) and rendered
@@ -578,10 +651,10 @@ asking, never the act. **Decided by** ADR 0152, 0175, 0234, 0259, 0272.
 ## Media — what a person watches, listens to and reads
 
 **Purpose.** To find, fetch and file copies of the works a person watches, listens to and reads, each in
-the library its kind names. **Recorded by** the `media-importer` module's settings and its memory of what
+the library its kind names. **Recorded by** the `media-importer` module's config values and its memory of what
 it was told, and the servarr apps' own libraries. **Upstream of** nothing. **Decided by** ADR 0295, 0296,
 0302.
-**Uses:** module, seat, setting (Module).
+**Uses:** module, seat, config value (Config).
 
 - **content** — a work a person watches, listens to or reads: a film, an album and its tracks, an
   episode, a book, a session of a sport event. It is known by an identity from a catalogue outside the
@@ -592,7 +665,7 @@ it was told, and the servarr apps' own libraries. **Upstream of** nothing. **Dec
 - **media release** — one copy of a work an engine can fetch, such as an NZB or a video. Downloaded, it
   sits in the downloads folder, not yet filed. ADR 0302 says *release*.
 - **library** — one folder of one kind, filed by one importer: the media-importer's, named in its
-  settings, or a servarr app's. Several libraries may hold one kind, as TV Shows and Anime both hold
+  config, or a servarr app's. Several libraries may hold one kind, as TV Shows and Anime both hold
   series.
 - **media file** — a file on disk together with its metadata: its kind, the fields that identify the
   work, and what part of the work the file is. It is what the media-importer takes.
@@ -682,6 +755,7 @@ renaming one sense, the old sense moves to a *Not:* line and becomes mechanical.
 | release | a person letting a held delivery go on | **release** | Change and delivery |
 | | taking a consumer off a licence | **unbind** (verb `release`, to rename) | Identity and access |
 | | a copy of a work an engine can fetch | **media release** | Media |
+| | a branch brought into `main` as one delivery | **release branch** | Change and delivery |
 | gate | the judgement on a delivery's first node | **first-node gate** | Change and delivery |
 | | the pull request status | **merge gate** | Change and delivery |
 | | a failed step stopping its module's later steps (ADR 0136) | *a failed step holds its module* | Placement |
@@ -712,6 +786,10 @@ renaming one sense, the old sense moves to a *Not:* line and becomes mechanical.
 | | a question someone must answer | **issue** | The record |
 | deploy | the per-node part of a delivery plan | **deploy plan** | Change and delivery |
 | | a wrapped program's own deploy | its own word | — |
+| managed | a placed file of which only named keys or a marked block are the mesh's | **managed** (`owner-at-runtime`) | Provisioning |
+| | a file the mesh writes, such as the agent's instruction file or `managed_settings` | the file's own name, or *a file the mesh places* | — |
+| trusted | a config value that decides what runs or who can reach what | **trusted** config value | Config |
+| | a sender on the operator's own list | **trusted** sender, its message an **operator message** | Operator and conversation |
 
 ## How this page is kept
 

00-META/process/01-research.md

@@ -63,13 +63,20 @@ An idea arrives in one of two forms, and the first step differs:
      the reviews.
    - **Pre-check before proposing**, against what the review sends back most: every record, issue or design
      the text names is in `links`; work put off names the issue that tracks it (an acceptance test is not
-     put-off work: it is what the build proves, step 6); each figure is given as measured (a range, not a
+     put-off work: it is what the build proves, step 7); each figure is given as measured (a range, not a
      rounded claim); no word on a glossary *Not:* line.
    - **Try at the cheapest level that answers the question.** A program's own behaviour (a library, a
      server, a protocol) is tried in process, on the machine's loopback, in minutes. Lab runs (about 12 to
      16 minutes fresh) are for the mesh's own code; before that code exists, a lab run tests nothing an
      in-process test does not, and its lab scenario is written as the build's acceptance test instead.
-6. **Settle the direction with the operator.** When the questions are answered, write `05-direction.md`:
+6. **Place it in the domains.** Before the direction, write `03-domains.md`: the domain or domains the idea
+   belongs to (the glossary's sections, ADR 0244); the modules and seats it lands in, each new, changed or
+   retired; what it does to each domain's words, each word added (with its domain and a one-line meaning),
+   changed or retired, and none on a *Not:* line or already meaning something else (the glossary's homonyms);
+   and whether a domain grows or shrinks, a concept moving between domains included. The direction names its
+   decisions in those words. Asked when the idea is set up, too: an option that lands a concept in the wrong
+   domain is offered with that cost named, like one that breaks a rule.
+7. **Settle the direction with the operator.** When the questions are answered, write `05-direction.md`:
    the proposed decisions in a few lines each, the options rejected and why, and the build's acceptance
    tests: what the build must prove before it is done, carried by its milestones (playbook
    [04](04-build-handoff.md)). Nothing else is left open: each question closes by a test, by a decision the
@@ -84,7 +91,8 @@ An idea arrives in one of two forms, and the first step differs:
 | reading and the setup questions (1, 2) | 30 minutes | the session's own, larger |
 | proposing (3, 4) | 15 minutes | larger |
 | each experiment or reading task (5) | 30 minutes | smaller, one agent at a time unless the operator allows more |
-| the direction (6) | 30 minutes | larger |
+| placing it in the domains (6) | 15 minutes | larger |
+| the direction (7) | 30 minutes | larger |
 
 A step past its bound is said to the operator at once, with what is being done about it. The lead reports
 as playbook 07 does: every ten minutes and at once when something is found, stops or needs the operator,
@@ -124,7 +132,7 @@ and why, is the more expensive half to rediscover.
 
 The rules on an effort are the knowledge base's: `propose` refuses one that breaks a rule that judges one
 record (the module's table test holds one case per rule), and the rules that judge the whole record set run
-after every acceptance and raise a condition when one fails. The habits of steps 2, 5 and 6 (options checked
+after every acceptance and raise a condition when one fails. The habits of steps 2, 5, 6 and 7 (options checked
 against the rules, one version per settled set, the cheapest level, nothing left open) are the lead's, read by
 the reviewer; of the pre-check, `propose` refuses a link to nothing and a retired word, and the review returns
 a record named but not linked, an untracked deferral and a figure not as measured. That this repository holds

00-META/process/02-graduation.md

@@ -13,7 +13,7 @@ clauses in force for a topic or a record).
 
 ## Graduating research
 
-The effort's `05-direction.md`, confirmed by the operator (playbook [01](01-research.md), step 6), is what
+The effort's `05-direction.md`, confirmed by the operator (playbook [01](01-research.md), step 7), is what
 graduates. The lead writes the records and the design on the larger model; it is one sitting, bounded at
 about an hour, and said to the operator if it runs past.
 
@@ -48,6 +48,11 @@ about an hour, and said to the operator if it runs past.
 
    The design lists the direction's acceptance tests: what the build proves before it is done.
 
+   The words of the effort's `03-domains.md` go into the glossary in the same change, each in its domain: a
+   word added gets its entry, a word whose meaning changed gets its entry rewritten, and a retired word moves to
+   its replacement's *Not:* line. A word that already means something else in another domain is named as a
+   homonym with the qualified form each domain uses.
+
 4. **Hand it to the work breakdown.** The design goes on through playbook [04](04-build-handoff.md):
    milestones, issues, and each milestone built as one feature step (playbook [07](07-feature-branches.md)).
 5. **Close the effort.** `knowledge-base.propose` the effort again, whole, with `status: graduated` and a

00-META/process/07-feature-branches.md

@@ -21,6 +21,16 @@ A small fix (one repository, one issue, about an hour of work) follows
   undelivered for a day: an issue done at 21:09 was still not on the machines at 15:00 the next day.
 - **Work that waits and nobody notices.** Most lost time was not work at all, but a check, a delivery plan
   or an agent waiting on something that had stopped, unseen.
+- **Review that keeps hardening.** One fix went through seven review rounds in five and a half hours, each
+  asking for more hardening than its issue asked (issue 704, 2026-10-14). A round is for what makes the
+  change wrong; everything else is an issue of its own.
+- **The first check after the whole branch is written.** A feature's catalogue branch, pushed once after
+  hours of local work, met its first check on 2026-10-16 and failed on 29 problems, TypeScript errors among
+  them, that a unit suite run continuously while working finds at once.
+- **A green pull request nobody marks.** An approved, green pull request that was not marked ready waited
+  12 h 17 min for someone to merge it (mesh-catalog #300, 2026-10-14).
+- **A module proven only after it reached the machines.** The mail modules were delivered with unit tests
+  only, then failed live three times (issues 859, 865, 868) and took five more hours of fixes.
 
 ## The shape
 
@@ -104,13 +114,40 @@ never into the running one, unless it blocks the running one.
    It says which round it is in ("round 1 of at most 3").
 3. **The report goes to the same fixing agents** that wrote the code, continued by their ids, so they fix
    with the context they already hold. Each answers the reviewer: what it changed, per finding, or why not.
-4. **The reviewer reads the answers and the new commits**, and approves or reports again. From round 2 it
-   asks changes only for a finding that makes the feature wrong; smaller points become issues of their own.
-   After round 3 the lead stops and brings the operator what is left, with a recommendation.
+4. **The reviewer reads the answers and the new commits**, and approves or reports again (step 5 says what a round
+   may ask). After round 3 the lead stops and brings the operator what is left, with a recommendation.
+5. **A finding outside the issues' done-when is never a change asked, in any round.** More hardening, a
+   further case, a nicer form: the reviewer opens it with `issue-tracker.open` and names the number in its
+   report, and the round does not wait for it. What a round asks is only what makes the change wrong against
+   its issues and its decisions.
+
+## Is the coast clear?
+
+Before the push of phase 3 (and of a small fix, playbook [08](08-small-fixes.md) step 5), the lead checks, for every
+repository the change touches, whether a **release branch** is in flight there: a branch other than `main` that
+collects a feature's merged work to bring it into `main` as one delivery.
+
+1. **Look for one.** A pull request into `main` whose head is a release branch (`gitea.gitea_open_pulls`), a
+   release branch holding merged work that `main` does not have yet (`git log origin/main..origin/<branch>`), or
+   a delivery plan of that release branch still running (`mesh-controller.plans`).
+2. **Compare the files.** `git diff --name-only origin/main...origin/<release branch>` against the files the
+   change touches.
+3. **Overlap: hold.** If the release branch touches a file the change touches, nothing is pushed into that repository
+   until the release branch's delivery plan is done. Then the feature branch is brought up to the new `main`, the unit
+   tests run again, and the push follows. The hold is on the wait list (its bound: the release branch's delivery plan),
+   and is said to the operator with what the change waits for.
+4. **No overlap: go on.** A release branch in another repository, or one that shares no file with the change, does not
+   hold it; its merge joins the merge window as any other (ADR 0276).
+
+Merging beside a release branch still in flight would make its lead resolve someone else's conflicts in the
+middle of it, and could send part of the change with its delivery (2026-10-16: the file module's
+controller part touched four files feature 57's release branch also changed).
 
 ## Phase 3 — Check (no review)
 
-1. **Push every feature branch and open one pull request per repository, together.** Pull requests in two or
+1. **Push every feature branch and open one pull request per repository, together, once the coast is clear**
+   (above). The integration tests
+   run only in the merge check (the operator, 2026-10-16), never before. Pull requests in two or
    more repositories that share the branch name are one delivery group (ADR 0239 §2).
    Where a session pushes through the forge tool `gitea_commit` (one commit on the forge's current base), the
    reviewer first confirms that commit's tree equals the reviewed one.
@@ -118,8 +155,14 @@ never into the running one, unless it blocks the running one.
    second review: phase 2 reviewed this tree.
 3. **A check that fails** goes back to the reviewer with the failure, for **one more cycle** of phase 2 with
    the same fixing agents; then push once again.
-4. **Mark each pull request ready** (`mesh/ready` and a comment `ready at <full sha>`) once the operator's word
-   for the feature is given; mesh-delivery merges it when its checks pass (ADR 0364).
+4. **The step's acceptance is proven before it is marked ready.** A step that adds or changes a module
+   carries an integration test that starts the module whole, its process against the real bus and store, and
+   shows the step's acceptance sentence; the forge's checks run it (ADR 0391 §1, §6). Unit tests alone are not
+   that proof; the mesh has no end-to-end tests yet, and the lab is not used (the operator, 2026-10-16).
+5. **The reviewer marks each pull request ready as soon as the acceptance is shown** (`mesh/ready` and a
+   comment `ready at <full sha>`, the head it approved); mesh-delivery merges it when its checks pass
+   (ADR 0364). The operator's word is waited for only when the step changes what the operator sees, removes
+   data, or needs a step only the operator's terminal can take; the lead says which before the step starts.
 
 **One exception: a catalogue change that uses a new manifest word.** The catalogue's merge check reads
 manifests with the controller the mesh runs, so the controller's pull request is merged and delivered first;
@@ -127,7 +170,8 @@ then `mesh-delivery.recheck` the catalogue's and merge it on the new verdict. Pl
 
 ## Phase 4 — Deliver
 
-The merge starts the delivery plan: build, publish, send. The lead follows it to done
+The merge starts the delivery plan: build, publish, send. A merge into a branch other than `main` is not a
+delivery: no machine receives it (issue 889 while it still starts one). The lead follows it to done
 (`mesh-controller.plans` with `wait` and `until: done`), then resolves the feature's issues with `fixed-by`
 naming its pull requests, and removes what is left: no `feat/<slug>` branch and no `.work/<slug>` worktree
 survive.
@@ -156,6 +200,8 @@ on, with when it started and its bound.
 | a fixing agent's issue | 30 minutes | ask it where it stands; split or take over |
 | the review | 15 minutes a round | ask the reviewer; stop at round 3 |
 | a merge check | 15 minutes | read the build queue (`mesh-controller.queue`) and the check's log |
+| the ready mark | 15 minutes after the acceptance is shown | the reviewer marks it, or the lead does |
+| a release branch in flight that shares files | its delivery plan done | report it every ten minutes; bring the branch up to `main` after |
 | a merge after ready | 5 minutes after the checks pass | read `mesh-delivery.show` for the delivery |
 | a delivery plan | its class's budget (`mesh-delivery.times`), at most 30 minutes | read `mesh-controller.plans`, then `mesh-delivery.stalled` |
 
@@ -200,6 +246,13 @@ lead prepares a `/clear` as the mesh's instruction "prepare before clear" says:
 feature's phase, its branches and heads, the context files' paths, the agents' ids, the wait list and the
 next action; then the prompt the operator pastes. The context files make the feature resumable after a clear.
 
+## Issues that stop
+
+An issue stays in `fixing` only while an agent works on it. A step that stops, for a wait past its bound, a
+hand-over, or the session's end, moves each of its issues not delivered back to `open` with
+`issue-tracker.move` and a note saying how far it got (its branch, its last commit, what is left). A list of
+issues in `fixing` that nobody works on reads to the operator as stuck work.
+
 ## How it is checked
 
 - A feature's issues show their commits on the feature branch (`git log --grep 'issue <n>'`), and no pull
@@ -209,6 +262,14 @@ next action; then the prompt the operator pastes. The context files make the fea
 - After a feature's delivery, `git branch -r | grep feat/<slug>` and `git worktree list` return nothing for it.
 - More than one open pull request in a repository that share no feature name, or a feature step whose issues
   stay in `fixing` for more than a working day, is the smell: stop and bring it to the operator.
+- A review report that asks a change outside the issues' done-when, or a fourth round, is the failure of the
+  review rules; `issue-tracker.list` with `flag: abandoned` lists issues left in `fixing` with nobody on them.
+- A pull request reviewed and green but not marked ready for more than 15 minutes is a lead that did not
+  mark it.
+- A pull request opened into a repository whose release branch was in flight and shared a file with it is the failure of
+  *Is the coast clear?*; the lead's report names the check it made before the push.
+- A step that adds or changes a module marked ready with no integration test that starts the module whole is
+  the failure of phase 3's fourth step.
 - A bed run from `.work/<slug>/mesh-lab` that fails naming a `.work/<slug>/<repo>/…` path it cannot find is a
   missing sibling worktree, not a mesh fault.
 

00-META/process/08-small-fixes.md

@@ -31,22 +31,34 @@ one delivery**. Everything before the push is local and fast.
    Commit, naming the issue. For a playbook or design edit, run the repository's own checks (in hq,
    `sh merge-check.sh`).
 4. **One review of the local commit, before anything is pushed** (a reviewer that did not write it, larger
-   model; at most 3 rounds, as playbook 07; from round 2 only what is wrong). The reviewer's findings go back to the same agent that wrote the fix, continued by
+   model; at most 3 rounds, as playbook 07; from round 2 only what is wrong; a finding outside the issue's
+   done-when is opened as an issue of its own, never asked as a change). The reviewer's findings go back to the same agent that wrote the fix, continued by
    its id, so the fix keeps its context. A playbook or design edit of a few lines may skip the reviewer: the
-   operator's word on the pull request is its review.
-5. **Push once and open the pull request.** The forge's merge checks run the integration tests. A failed check
+   operator's word on the pull request is its review, and the lead marks it ready on that word.
+5. **Push once and open the pull request, once the coast is clear** (playbook [07](07-feature-branches.md), *Is
+   the coast clear?*: no release branch in flight in the repository that shares a file with the fix). The forge's merge
+   check runs the integration tests, the only
+   place they run (the operator, 2026-10-16). A failed check
    goes back to the same agent with the failure, and the reviewer reads only the change it makes.
-6. **Mark it ready** (`mesh/ready` and `ready at <full sha>`) once the operator's word is given; mesh-delivery
-   merges it when its checks pass.
+6. **The reviewer marks it ready at once** (for an edit that skipped the reviewer, the lead, on the
+   operator's word) (`mesh/ready` and `ready at <full sha>`, the head it approved);
+   mesh-delivery merges it when its checks pass. A fix to a module that changes how it runs carries an
+   integration test starting the module whole against the real bus and store, run by the forge's checks
+   (ADR 0391 §1, §6); unit tests alone are not that proof, and the lab is not used. The operator's word is waited for only when the fix changes what the operator sees, removes data,
+   or needs the operator's terminal.
 7. **Follow its delivery plan to done** (`mesh-controller.plans` with `wait` and `until: done`), prove the fix on
    the mesh (the symptom gone, measured), and resolve the issue with `located-in` and `fixed-by` the same hour.
 
+A fix that stops before its delivery moves its issue back to `open` with a note saying how far it got
+(branch, last commit, what is left), as playbook [07](07-feature-branches.md) says.
+
 ## Bounds
 
 | Waiting on | Bound | Past the bound |
 |---|---|---|
 | building the fix | 1 hour | it is a feature: stop and plan it under playbook 07 |
 | the review | 15 minutes | ask the reviewer where it stands |
+| the ready mark | 15 minutes after the review approved | the reviewer marks it, or the lead does |
 | the merge check | 15 minutes | read `mesh-controller.queue` and the check's log |
 | the merge after ready | 5 minutes after the checks pass | read `mesh-delivery.show` for the delivery |
 | the delivery plan | its class's budget (`mesh-delivery.times`), at most 30 minutes | read `mesh-controller.plans`, then `mesh-delivery.stalled` |
@@ -63,3 +75,8 @@ reading itself and uses one subagent only for the review.
 - A small fix has one pull request with one or few commits naming its issue, opened after its review: a pull
   request with many heads is a fix reviewed after its push.
 - Its issue moves to `resolved` within the hour its delivery plan ends.
+- A pull request reviewed and green but unmarked
+  for more than 15 minutes, a fix to a module's running marked ready with no integration test of the module whole, or a review report
+  asking a change outside the issue's done-when, is the failure of steps 4 to 6.
+- An issue in `fixing` with nobody on it shows in `issue-tracker.list` with `flag: abandoned`; a stopped fix
+  moves it back to `open` with its note.

03-DESIGN/01-to-be/41-the-shell-and-the-accounts-environment.md

@@ -2,8 +2,9 @@
 layer: to-be
 status: in-progress
 code: [mesh-host, mesh-controller, mesh-catalog]
-updated: 2026-10-12
+updated: 2026-10-16
 decisions:
+  - "ADR 0394"
   - "ADR 0310"
   - "ADR 0268"
   - "ADR 0252"
@@ -90,6 +91,7 @@ WP5  assign and prove                            (operator-gated)       needs WP
 WP6  a module puts the account in a group        (mesh-host, mesh-controller, mesh-catalog)   issue 247
 WP7  the control-node withholds execute          (mesh-controller, mesh-catalog)          ADR 0268
 WP8  a node's files and accounts are read        (mesh-sdk, mesh-catalog, mesh-controller) ADR 0310, issue 418
+WP9  every file on a node is managed            (mesh-catalog, mesh-controller) ADR 0394, issue 900
 ```
 
 WP1, WP2 and WP4 are independent, and are built in parallel on one feature branch per repository
@@ -341,6 +343,10 @@ out, the control-node's value is set to `withhold` and zsh is pushed to it. Then
 
 *`mesh-sdk`, `mesh-catalog`, `mesh-controller`. ADR 0310, extending ADR 0268; tracked by issue 418.*
 
+**Replaced by WP9.** ADR 0394 supersedes ADR 0310: `node-files` takes over every read below, with the same
+bounds, content rule and refusal of secret places; once `node-files` is held on every node, the next delivery
+removes `node-reads` and `mesh-reads`.
+
 ADR 0268 §5 has narrow read tools take the common reads over from `execute`, so that an approval is asked for an
 act and not for a read, and ADR 0286 §44 sets the approval mark on `execute` only once those reads have a tool on
 every node. Two had none: reading or searching a file, and looking up an account or a group.
@@ -366,3 +372,38 @@ under the same issue.
 `mesh-sdk` test of the content rule and one in each of its users; `mesh_search` for `cat`, `grep` and
 `getent passwd` finding the verbs. Live, the kernel's RAID status file is read through the seat on the home
 server, and the agent's credentials file on the laptop is refused.
+
+## WP9 — Every file on a node is managed through `node-files`
+
+*`mesh-catalog`, `mesh-controller`. ADR 0394; tracked by issue 900.*
+
+`node-reads` only reads, and as an account that cannot open a person's home, so nothing in the mesh could copy,
+move, write or delete a file, and a cleanup needed a shell on the machine. Most files belong to no module: homes,
+project folders, downloads, logs, scratch.
+
+- **A node seat, `node-files`, on every node**, held by a module of its own, `mesh-files`, beside `mesh-reads`
+  in the catalogue; the controller holds the seat's definition beside the other node seats. It has a verb for each file action: list,
+  stat, readlink, read, search, write, copy, move, delete, make a folder, change mode, change owner, account and group
+  lookup, and the trash's list and restore. Each says what it replaces (ADR 0245): `ls`, `stat`, `readlink`, `cat`,
+  `grep`, `cp`, `mv`, `rm`, `mkdir`, `chmod`, `chown`, `getent passwd`, `getent group`, `id`, and `ssh <node> cp` for a
+  copy between nodes.
+- **It may touch every file.** It declares no account of its own: the tool runner starts it as the node's
+  operator account, which has sudo without a password, and it uses `sudo -n` only where that account's own rights
+  do not reach. It keeps each file's owner and modes as well as it can: a copy or a move keeps them, a new file
+  takes its folder's owner. Which files to touch is the caller's responsibility; it judges no permission.
+- **Nothing is lost at once.** A file deleted or overwritten goes to the node's trash with who asked and why, is
+  restorable for 7 days, and is emptied after.
+- **A path a module owns is refused**, naming the module and its tool, unless the call says `override` with a
+  reason; an override is recorded and said to the operator.
+- **It replaces `node-reads`.** Its reads keep WP8's bounds, content rule and kernel reads. Every node is
+  assigned `mesh-reads`, so `node-reads` and `mesh-reads` are removed by the next delivery, once `mesh-files`
+  holds `node-files` on every node.
+- **No Approve is asked**; every act is recorded with its caller. Read and search never return the content
+  of a known credential file or a secret place (the mesh never prints a token); copying or moving one is
+  allowed.
+
+**Proof.** The module's tests: each verb against a temporary tree keeps owner and modes, a new file takes its
+folder's owner, a delete is restorable from the trash and gone after 7 days, an owned path is refused and an
+override recorded, a credential file's content is never returned. Live: the operator's `~/.claude` on a workstation is listed, a file in `/etc` is read through sudo, and a file copied from one node to another
+arrives with its owner and modes.
+

RELEASE-57.md

@@ -0,0 +1,6 @@
+# Release 57: config and provisioning
+
+This branch carries the work of design 57 (ADR 0348, ADR 0349) in this repository. Each package
+merges here through its own reviewed pull request; the branch reaches main as one pull request, in one
+delivery group with the branch of the same name in mesh-controller, mesh-host, mesh-sdk, mesh-catalog
+and hq, after a rehearsal in the lab. This file is deleted by the last commit before that pull request.